F301.1 קטלוג ברסיס

תרסיסים 17 sales@ barsys.co.il | 03-6500212 פקס: | 03-6500210 טלפון: תרסיס מסיר כתמים משיש ואריחים מסיר כתמי שמן וגריז ממשטחים נקבוביים כמו: שיש, אבן טבעית, בריק וטרוורטין. מסיר גם כתמי עט, קפה, ויין. ל ” מ 200 מכיל : || 12 כמות באריזה: || P323 ט: ” מק TECHNICAL DATA SHEET | 01 MARBLE AND COTTO STAIN REMOVER – Product designed for removing stubborn grease stains from porous surfaces such as brick, marble, travertine and natural stone. Also effective in removing stains such as pen marks, coffee or wine. This spray is ideal for tile and cle aning comp anies. It rem oves grease stains, oil stains, but also penmarks and organic substances from marble, natural stone and other porous surfaces . Technical Specifications: Barcode EAN: 8034108892450 Quantity 200 ml Box / Case 12 Pz. Aspect Tin-Plate can containing under pressure fluid Color White Odour Scented fragrance Relative density at 20°C 0,65 ÷ 0,69 g/ml Flash point Und. 0° C extremely flammable Pressure at 20°C 4/6 bar Viscosity at 25°C 0,70 mm2/s ASTM D445 Boiling point 57°C Ph(20°C) (on dry residual) ca. 6,5 (50 g / l) DIN / ISO 787 / 9 Melting point ca. 1700 °C (dry residual) Termic decomposition > 2000 °C (dry residual) HOW TO USE : Shake well before use. Spray 20-30 cm away. Allow to the product to dry (about 5 minutes). Brush carefully to remove the white powder formed on the treated surface. If necessary, repeat the operation. Product residues can be removed using a brush or a sponge soaked with water and soap. Important: as a stain remover, the product should only be used to remove stains in the area without exceeding use. It is recommended first, to make a test on a small area. Marble and CottoStain Remover 200 ml (P323) MODALITY OF STORAGE Before using: stock the produc t in a dry location and don’t stock it with a temperature under 5°C and over 35°C, after the use, keep containers closed. In the original package, the product can be conserved for 24 months (warranty).Theproduct doesn’t expire. After the firstusage: conserve ina freshand dry location,away from hot spring. Keepout of reach of children. תרסיס מסיר סיליקון תערובת של ממיסים, נועד להסרת סיליקון טרי או יבש. מוצר זה פועל באופן מהיר יותר על סילקון טרי מאשר על סיליקון יבש. כאשר נחוץ להסיר כמות גדולה של סיליקון התחל להסיר כמה שניתן ולאחר מכן רסס ונקה שוב. החומר לא מכתים או מאכל. ל ” מ 400 מכיל : || 12 כמות באריזה: || P301 ט: ” מק Ambro-Sol isa registered trademark–All rights reserved–Totalorpartial reproduction isprohibited. TECHNICAL DATA SHEET | 01 Ambro-Sol - 25020Cigole (BS) Italy - www.ambro-sol.com - info@ambro-sol.com This spray works perfectly with fresh silicone and with hardened silicone. It removes silicone and its re- siduals without ruining the surface. This is another amazing product included in the Ambro- Sol “Clean- ing” line. . Technical Specifications: Barcode EAN: 8034108890319 Quantity 400 ml Box / Case 12 Pz. Aspect Tin-Plate can containing under pressure fluid Color Light white Odour Characteristic of solvent Relative density at 20°C 0,68 ÷ 0,72 g/ml Flash point Und. 0° C extremely flammable Pressure at 20°C 4/6 bar Water solubility insoluble Solvent solubility Total Viscosity at 100°C 3,8 cSt (dry residue) Melting point 52-62°C ( dry residue ) Penetration test <= 30 dmm (25°C) ( dry residue ) Observations Product with gel technology, it doesn’t drip. SILICONE SEALANT REMOVER – Mix of solvents, designed to remove excess silicone or silicone scraps. The product acts more quickly in the presence of fresh silicone than it does in the presence of hardened sili- cone. When large amounts of silicone need to be removed, begin by re- moving as much silicone as possible. Afterwards, apply the solvent. It does not corrode or tarnish any surface. Silicone Sealant Remover 400 ml (P301) HOW TO USE: On Fresh silicone: Shake well before use and spray on the surface from a distance of about 15 cm, leave to act for a few minutes and then clean with a cloth or scrapping tool. Hardened silicone: Scrape the biggest section carefully with a blade or putty knife. Shake well before use and spray the surface from a distance of about 15 cm and leave the product to act for a few minutes. Remove with a rag or scrapping tool Repeat the operation if necessary. MODALITY OF STORAGE Before using: stock the product in a dry location and don’t stock it with a temperature under 0°C and over 45°C, after the use, keep containers closed. In the original package, the product can be conserved for 24months (warranty).Theproduct doesn’t expire. After the firstusage: conserve ina freshand dry location,away from hot spring. Keepout of reach of children. This information, even if reliable,must be considered onlyapproximate.Wearenot responsible for thewrong use of the product, or the violationof any license. Before using, the users should verify the suitabilityof the product for its specific use. BEFORE USE, CONSULT THE SAFETY DATA SHEET OF THE PRODUCT . תרסיס דבק רב שימושי , בד, עץ, וחומרים פלסטיים. PVC , מתאים במיוחד להדביק גומי, ברזל עמידות גבוהה לחום אפילו בחשיפה ממושכת. עמידות גבוהה בפני חומרים פלסטיים באופן כללי. ל ” מ 400 מכיל : || 12 כמות באריזה: || I254 ט: ” מק Ambro-Sol isa registered trademark–All rights reserved–Totalorpartial reproduction isprohibited. TECHNICAL DATA SHEET | 01 Ambro-Sol - 25020 Cigole (BS) Italy - www.ambro-sol.com - info@ambro-sol.com This spray is amazing! It dries immediately and can be used on different materials. It is resistant to high temperature. These are its secrets, you just have to try it! Quantity 400 ml Barcode EAN 13: 8034108890296 Box / Case 12 pz Technical Specifications: Aspect Tin-Plate can containing under pressure fluid Color Colorless Odour Characteristic of solvent Relative density at 20°C 0,66 ÷ 0,70 g/ml Flash point Und.0° C extremely flammable Pressure at 20°C 4/6 bar Dry residue 38 - 40 % Viscosity at 20°C 240 - 300 mPa∙s. (Visc. Brookfield RVT) Tack (ropiness) Very strong Taking rapid Drying times Min. 3’ – Max 6’ Adhesive type Rubber thermoplastic adhesive in solvent Range temperature ÷ 80°C (peak) MULTIPURPOSE PERMANENT GLUE – Particularly useful for gluing rubber, metal, vinyl, fabric, wood, and plastic materials. High heat resistance even with prolonged exposure. Also, highly resistant to plastic agents in general. It comes with an adjustable spray nozzle. Multipurpose Permanent Glue (I254) MODALITY OF STORAGE Before using: stock the product in a dry location and don’t stock it with a temperature under 5°C and over 35°C, after the use, keep containers closed. In the original package, the product can be conserved for 24months (warranty).Theproduct doesn’t expire. After the firstusage: conserve ina freshand dry location,away from hot spring. Keepout of reach of children. This information, even if reliable,must be considered onlyapproximate.Wearenot responsible for thewrong use of the product, or the violationof any license. Before using, the users should verify the suitabilityof the product for its specific use. BEFORE USE, CONSULT THE SAFETY DATA SHEET OF THE PRODUCT . HOW TO USE: Shake Well before use. Clean the part to glue. Spray the product on one of the surfaces to glue. Overlap the other one sticking on the glued part applying strong pressure. The initial taking is rapid but the complete adhesion happens within 24 hours. 17 sales@ b arsy .co.il | 0 3-650021 פקס: | 03-6500210 טלפון: